-14
Setting Up the Projector
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet fl at and
level.
Note
•
The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing diffi cult.
•
For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing diffi cult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
•
A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
■
Place the projector at the required distance from the screen according to the desired picture size.
Example of standard setup
Note
•
For details, refer to “Picture (Screen) Size and Projection Distance” on page
16
.
L
H1
H2
90
°
90
°
Image
Lens center
Lens center
Lens shifted to lowest position
Lens shifted to highest position
L :
Projection
distance
H1 : Distance from the lens center to the bottom of the image
(when the lens is shifted to the lowest position)
H2 : Distance from the lens center to the bottom of the image
(when the lens is shifted to the highest position)
XVZ21000̲E̲Ousyu̲P12-16.indd 14
XVZ21000̲E̲Ousyu̲P12-16.indd 14
2006/07/31 19:53:43
2006/07/31 19:53:43
