Sharp XV-Z12000 - Vision - DLP Projector, Operation Manual

Page: 60 / 98

Basic Operation
-59
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝
For operating the menu screen, see
pages 42 to 45.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝
For operating the menu screen, see
pages 42 to 45.
Note
When setting to “ Normal” or
“ High Speed”:
•
Auto Sync adjustment will occur when the
projector is turned on or when the inputs
are switched, while connected to a com-
puter.
Manual adjustments should be per-
formed:
•
When the optimum image cannot be
achieved with Auto Sync adjustment. See
page
57 .
•
Auto Sync adjustment may take some
time to complete, depending on the im-
age of the computer connected to the
projector.
•
When setting “Auto Sync” to “OFF” or
“High Speed”, and if
is pressed, Auto
Sync will be executed in “High Speed”
mode. If the button is pressed again
within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
AUTO SYNC button
Screen display during Auto Sync
XV_Z12000_E_US_p42_60.p65 03.9.24, 2:03 PM 59