Sharp XV-Z12000 - Vision - DLP Projector, Operation Manual

Page: 39 / 98

*
Keystone Correction and Vertical Size Adjustment
Correcting Trapezoidal
Distortion and Adjust-
ing the Vertical Size of
the Picture
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction and the
adjustment of the vertical size of the picture.
Note
•
When the image is projected either from
top or from bottom toward the screen at
an angle, the image becomes distorted
trapezoidally.
The function for correcting trapezoidal dis-
tortion is called Keystone Correction.
•
The Keystone Correction can be adjusted
up to angle of approximately ±20 degrees.
•
There are some input signal in which
“KEYSTONE” does not work.
1
Press .
•
Each time is pressed, the settings
toggles as shown on the right.
2
Press
"
,
'
,
\
and
|
to adjust
the Keystone correction.
•
If you want to make more detailed cor-
rections, press
to display the test
pattern, and then press
" " " " "
,
' ' ' ' '
,
\ \ \ \ \
and
| | | | |
to make the adjustments.
Note
•
Since the trapezoidal distortion of the im-
age can be corrected up to an angle of
approximately ±20 degrees, the actual
screen can be diagonally set up to that
angle as well.
•
Press to cancel Keystone Correction.
•
Straight lines or the edges of images
may appear jagged while adjusting
the image.
KEYSTONE button
UNDO button
ENTER button
Normal screen
Keystone Correc-
tion screen
Compresses
upper side.
Compresses
lower side.
Test pattern
"
,
'
,
\
,
|
buttons
Vertical size
adjustment screen
* “V-SIZE” is not dis-
played when the value
of “KEYSTONE” is “0”.
-38
XV_Z12000_E_US_p33_41.p65 03.9.24, 2:00 PM 38