Sharp XV-C100U, Service Manual

Page: 16 / 73

16
XV-C100U
ADJ IN (adjustment input) FUNCTION
1. Keys used for the adjustments
On the sub PWB: S2001
Control keys: [ENTER], [MENU], [SELECT/ADJ.
'
], [SELECT/ADJ.
"
], []
2. Operation
Press S2001 to call up the ADJ IN mode.
Use the [SELECT/ADJ.
'
] and [SELECT/ADJ.
"
] keys to select an adjustment group, and press the
[ENTER] key.
Use the [SELECT/ADJ.
'
] and [SELECT/ADJ.
"
] keys again to select an adjustment subject, and
press the [ENTER] key.
The [SELECT/ADJ.
'
] and [SELECT/ADJ.
"
] keys are also used to make adjustments.
Each time the [ENTER] key is pressed on the ADJ IN screen, the adjustment subjects of a group are
changed one by one. (Pressing the [ ] key changes the subjects in the reverse order.)
When the [MENU] key is pressed, the previous group appears on the screen.
Press S2001 again to go out of the ADJ IN mode.
The adjustment group "LINE" is not used here.
Do not feed the signal when the adjustment group "N • W" is used.
Adjustment
subjects
Group
VIDEO 2
SUB-BIAS
R-BIAS
B-BIAS
R-DRIVE
B-DRIVE
TINT
COLOR
P-COLOR
S-COLOR
VIDEO 3
GAMMA1
GAMMA2
AGCADJ
T-BRT
VIDEO 4
C-CONT
C-BRIGHT
C-COLOR
C-TINT
C-H-CENT
C-PH-CENT
SET
HL
LINE
AUTO
OFF TIMER
TEMP1
TEMP2
FACTORY SET4
N • W
RED
GREEN
BLUE
N • W
TEST
TIME1
TIME2
VIDEO 1
H-CENT
P-H-CENT
CONT
BRIGHT
SUB-R
SUB-G
SUB-B