Sharp XV-C100U, Service Manual

Page: 24 / 73

XV-C100U
24
No. Adjustment Item Adjustment Conditions Adjustment Procedure
21 On-screen
display position
check (L2003)
• Turn L2003 so that the display bar
be well centered on the screen.
22
Temperature
sensor setting
check
• Make sure that the setting is 2.
Component
horizontal
center (NTSC)
(DAC) 1. Receive the NTSC monoscope pattern
signal.
2. Press S2001 to call up the ADJ IN mode
and select the following subject.
Group: VIDEO 4
Subject: C-H-CENT
• Using the
'
and
"
keys, make the
overscan just the same at right and
left.
Overscan: 91-97%
1. Press S2001 to call up the ADJ IN
mode and select the following group.
Group: SET
Subject: HL
1. Receive the NTSC monoscope pattern
signal.
2. Press the SOUND UP/DOWN keys to
get the sound volume display bar on
the screen.
Component
horizontal
center (PAL)
(DAC)
1. Receive the PAL monoscope pattern
signal.
2. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group: VIDEO 4
Subject: C-PH-CENT
• Using the
'
and
"
keys, make the
overscan just the same at right and
left.
Overscan: 91-97%
24
23