E-7
ENGLISH
XL-UR27H
2008/June/11
XL-UR27H
2008/June/11
XL-UR27H
Preparation for Use
System connections (continued)
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM
aerial wire in the direction where the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Speaker connection
Connect the black wire to the minus (–) terminal, and the red wire to the plus
(+) terminal.
Caution:
Using antislip speaker cushions
You can install the speakers either vertically or horizontally. Affix the
cushions (supplied) to the bottom of the speakers to prevent them from
sliding or falling due to vibration.
A sheet of speaker cushions (8 pcs) is supplied with this product. Use 4
cushions per speaker.
AC power connection
After checking all the connections have been made correctly, plug the AC
power lead of this unit into the wall socket. If you plug in the unit first, the unit
will enter the demonstration mode.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use
for a prolonged period of time.
Use speakers with an impedance of 8 ohms or more, as lower impedance
speakers can damage the unit.
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
Do not let the bare speaker wires touch each
other.
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
Do not stand or sit on the speakers. You may be injured.
Red
Black
Incorrect
(Vertical position)
(Horizontal position)
Wall socket
(AC 220 - 240 V ~ 50 Hz)
