E-15
ENGLISH
XL-UR27H
2008/June/10
XL-UR27H
2008/June/10
XL-UR27H
CD or MP3/WMA disc Playback
Advanced CD or MP3/WMA disc playback (continued)
Programmed play
You can choose up to 32 selections for playback in the order you like.
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 5 to add tracks. The new
tracks will be stored after the last track of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or
button.
MP3/WMA folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 17 to
select folder)
Notes:
If the disc lid is opened, the programmed sequence will be
cancelled.
If you press the ON/STAND-BY button to enter the stand-by mode
or change the function from CD to another, the programmed
selections will be cleared.
During the programme operation, random play is not possible.
1
Whilst in the stop mode, press
the MEMORY button on the
remote control to enter the
programming save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the
or
button.
3
Press the MEMORY button to
save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
You can also check the programmed tracks by pressing the
TUNING ( or ) button.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the (CD ) button.
The total number in memory will
appear.
6
Press the / (CD / ) button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control whilst the “MEMORY”
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
