manualshive.com logo in svg

Sharp XL-UR27H, Type Manual

Share
Download
Sharp XL-UR27H Type Manual Download Page 34

E-34

ENGLISH

8

XL-UR27H

2008/June/10

XL-UR27H

Advanced Features

Enhancing your system

The connection lead is not included. Purchase a commercially
available lead as shown below.

Auto power on function:

When you press any of the following buttons, the unit turns on.

AUDIO IN button (remote control): The unit turns on and the
“AUDIO IN” function is activated.

 /

 

 or FUNCTION button on the main unit: The unit turns on and

playback of the last function starts (CD,TUNER,USB,AUDIO IN).

Listening to the playback sounds of portable
audio player, etc.

Note:

To prevent noise interference, place the unit away from the
television.
 

Headphones

Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Before  plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.

XL-UR27

Portable audio player, etc.

Audio cable

(not supplied)

1

Use a connection lead to connect the portable audio player
etc. to the AUDIO IN socket.

When using video equipment, connect the audio output to this
unit and the video output to a television.

2

Press the ON/STAND-BY button to turn the power on.

3

Press the AUDIO IN button.

4

Play the connected equipment.

If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.

Summary of Contents for XL-UR27H







































Reviews:

No comments

Brands by name

Popular brands

Load more brands