Sharp XL-DV75HMKII, Operation Manual

Page: 36 / 41

XL-DV75HMKII_001 EN.fm
E-26
2009November 10
Listening to the radio
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING ( or ) button
again.
●
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
●
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 27.
●
Tuning will stop when reach to 87.50 MHz or 108.00 MHz.
To receive an FM stereo transmission:
Press the AUDIO button to select FM mono or FM stereo.
●
“ST” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the AUDIO button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
Up to 40 stations for FM band can be stored and recalled at the push
of a button. (PRESET (
or ))
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become
disconnected.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
■
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select the TUNER
(FM) mode.
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will stop
at the first receivable broadcast station.
FM stereo mode indicator
DIRECT DIRECT
ON / ON /
STAND-BY STAND-BY
OPEN / CLOSE OPEN / CLOSE
TUNING TUNING
EQUALIZER EQUALIZER VOLUME VOLUME
MEMORY MEMORY
TOP MENU TOP MENU
AUDIO AUDIO ZOOM ZOOM ANGLE ANGLE
STEP STEP SLOW SLOW
ASPM / PTY ASPM / PTY
RDS RDS
DISP DISP A-B A-B
SUB TITLE SUB TITLE
/ DIGEST
/ DIGEST
MENU/PBC MENU/PBC
RETURN RETURN
X-BASS X-BASS
MUTE MUTE
OSD OSD FUNCTION FUNCTION
TUNING TUNING
SETUP SETUP
ENTER ENTER
1 2 3
4 5 6
7 8 9
0 10 10
ON / ON /
STAND-BY STAND-BY
TUNING TUNING
MEMORY MEMORY
TUNING TUNING
FUNCTION FUNCTION
PRESET PRESET
RANDOM RANDOM
PRESET PRESET
PRESET PRESET PRESET PRESET
■
Memorising a station
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button to enter the preset tuning saving
mode.
3 Within 6 seconds, press the Direct Search buttons to select the
preset channel number.
Enter the channel number using the Direct Search buttons.
To select channel 1: Press “0” and “1”.
To select channel 12: Press “1” and “2”.
4 Press MEMORY button to memorise the station. The preset is
memorised when the “MEM” indicator is gone.
If the “MEMORY” and preset number indicators disappear before
the station is memorised, repeat the operation from step 2
onwards.
5 Repeat steps 1 - 4 to set other stations or to change a preset
station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
■
To recall a memorised station