Sharp XG-V10XE, Service Manual

Page: 3 / 160

3
XG-V10XE
Specifications
Product type LCD Projector
Model XG-V10XE
Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480i/480P/720P/1080i
Display method LCD panel x 3, RGB optical shutter method
LCD panel Panel size:46 mm (1.8" ) (27.6 [H] x 36.9 [W] mm))
Display method:Translucent TN liquid crystal panel
Drive method:TFT (Thin Film Transistor)Active Matrix panel
No.of dots:786,432 dots (1,024 [H] x 768 [V])
Projection lamp 200 W UHP lamp x 2
Contrast ratio 400:1
Video input signal BNC Connector:VIDEO (INPUT 4, 5), composite video,1.0 Vp-p,sync negative, 75
Ω
terminated
RCA Connector:AUDIO (INPUT 4,5),0.5 Vrms more than 22 k
Ω
(stereo)
S-video input signal 4-pin Mini DIN connector (INPUT 4,5)
Y (luminance signal):1.0 Vp-p,sync negative, 75
Ω
terminated
C (chrominance signal):Burst 0.286 Vp-p, 75
Ω
terminated
Component input signal BNC Connector (INPUT 2, 4, 5)
Y:1.0 Vp-p,sync negative,75
Ω
terminated
P
B
:0.7 Vp-p,75
Ω
terminated
P
R
:0.7 Vp-p,75
Ω
terminated
Horizontal resolution 620 TV lines (S-video input),650 TV lines (DTV 720P input,STRETCH mode)
RGB input signal 15-PIN MINI D-SUB CONNECTOR (INPUT 1), 5 BNC CONNECTOR (INPUT 2):
RGB separate/composite sync/sync on green type analog input:0 –0.7 Vp-p, positive,
75 terminated
DVI CONNECTOR (29-PIN) (INPUT 3), RGB (DIGITAL),250 –1,000 mV, 50
Ω
H
ORIZONTAL SYNC.SIGNAL:
TTL level (positive/negative) or composite sync (Apple only)
V
ERTICAL SYNC.SIGNAL:
Same as above
Pixel clock 12 –230 MHz
Vertical frequency 43 –200 Hz
Horizontal frequency 15 –126 kHz
Computer control signal 9-pin D-sub connector (RS-232C Input Port/Output Port)
Speaker system 5 x 8 cm (1
31
⁄
32
" x 3
5
⁄
32
" ) oval 2, 3 W + 3 W (stereo)
Rated voltage AC 110 –120/220 –240 V
Input current 6.2 A/3.1 A
Rated frequency 50/60 Hz
Power consumption 575 W
Power dissipation <2,100 BTU/hour
Operating temperature
+ 5
°
C to + 40
°
C
Storage temperature
– 20
°
C to + 60
°
C
Cabinet Plastic
I/R carrier frequency 38 kHz
Laser pointer of remote control Wave length:650 nm /Max.output:1 mW /Class II Laser Product
Dimensions (approx.) 444.2 x 196.2 x 621.3 mm (W x H x D) (main body only)
530.1 x 221.9 x 643.2 mm (W x H x D) (including standard lens, terminal cover, adjustment feet
and projecting parts)
Weight (approx.) 18.9 kg (main body only)
Supplied accessories Remote control, Two AA size batteries, Power cord (1.8 m), RGB cable (3 m), PS/2 mouse control
cable (1 m), USB mouse control cable (1 m), Remote mouse receiver, Extra air filter, Terminal
cover, CD-ROM, LCD projector operation manual, LCD projector quick references, Sharp Advanced
Presentation Software operation manual
Replacement parts Lamp unit (Lamp/cage module)(BQC-XGV10WU/1),Remote control (RRMCG1565CESA), AA size
batteries,Power cord,RGB cable (QCNW-5304CEZZ),PS/2 mouse control cable (QCNW-
5113CEZZ),USB mouse control cable (QCNW-5680CEZZ),Remote mouse receiver
(RUNTK0673CEZZ),Air filter (PFILD0110CEZZ),Terminal cover (CCOVA1789CE01),CD-ROM
(UDSKA0038CEN1),LCD projector operation manual (TINS- 7277CEZZ),LCD projector quick ref-
erences (TINS-7278CEZZ,TINS-7279CEZZ,TINS- 7280CEZZ),Sharp Advanced Presentation
Software operation manual (TINS-7281CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display)
panels.These very sophisticated panels contain 786,432 pixels ( x
RGB) TFTs (Thin Film Transistors). As with any hig technology elec-
tronic equipment such as large screen TVs,video systems and video
cameras,there are certain acceptable tolerances that the equipment
must conform to.
This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen.This
will not affect the picture quality or the life expectancy of the unit.
Specifications are subject to change without notice.