Sharp XG-V10XE, Service Manual

Page: 12 / 160

12
XG-V10XE
Connection Pin Assignments
INPUT 1 RGB and OUTPUT (INPUT 1,2)Signal Input Ports:15-pin Mini D-sub female connector
RGB Input
Analog
RS-232C Port:9-pin D-sub male connector of the DIN-D-sub RS-232C cable
5
10
15
1
6
11
Pin No. Signal Name I/O Reference
1 5
6 9
DVI Port:29-pin
9 1
8 16
C1 C2
C3 24 17 C4
C5
Pin No. Name
Component Input
Analog
1. Video input (red)
2. Video input
(green/sync on green)
3. Video input (blue)
4. Reserve input 1
5. Composite sync
6. Earth (red)
7. Earth (green/sync on green)
1. PR (CR)
2. Y
3. PB (CB)
4. Not connected
5. Not connected
6. Earth (PR)
7. Earth (Y)
8. Earth (PB)
8. Earth (blue)
9. Not connected
10. GND
11. GND
12. Bi-directional data
13. Horizontal sync signal
14. Vertical sync signal
15. Data clock
9. Not connected
10. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
1 CD Not connected
2 RD Receive Data Input Connected to internal circuit
3 SD Send Data Output Connected to internal circuit
4 ER Not connected
5 SG Signal Ground Connected to internal circuit
6 DR Data Set Ready Output Not connected
7 RS Request to Send Output Connected to internal circuit
8 CS Clear to Send Input Connected to internal circuit
9 CI Not connected
•*1 Return for 5 V,Hsync.and Vsync.
•*2 Analog R,G and B return
•*3 These pins are not used on this equipment.
1 T.M.D.S.Data 2 –
2 T.M.D.S.Data 2 +
3 T.M.D.S.Data 2/4 Shield
4 T.M.D.S.Data 4 – *3
5 T.M.D.S.Data 4 + *3
6 DDC Clock
7 DDC Data
8 Analog Vertical Sync
9 T.M.D.S.Data 1 –
10 T.M.D.S.Data 1 +
11 T.M.D.S.Data 1/3 Shield
12 T.M.D.S.Data 3 – *3
13 T.M.D.S.Data 3 + *3
14 5 V Power
15 Ground*1
16 Hot Plug Detect
17 T.M.D.S.Data 0 –
18 T.M.D.S.Data 0 +
19 T.M.D.S.Data 0/5 Shield
20 T.M.D.S.Data 5 – *3
21 T.M.D.S.Data 5 + *3
22 T.M.D.S.Clock Shield
23 T.M.D.S.Clock +
24 T.M.D.S.Clock –
C1 Analog Red
C2 Analog Green
C3 Analog Blue
C4 Analog Horizontal sync
C5 Analog Ground*2