Sharp XG-P25X - Conference Series XGA LCD Projector Operation Manual Download Page 95

Page: 95 / 103

roubleshooting

Unable to save the startup image

Do not turn off the projector while transmission.
The image data may be lost.

Quality of the image is low

Check the compression rate setting (

page 81

Note that

Quick Transfer

is fixed in the “Normal quality, middle speed”

setting.

Unable to speed up the transfer or improve the image quality

If the image file is saved in JPEG format, its compression rate cannot
be changed.
Note that the compression rate only applies to BMP file format.

Unable to speed up “Gamma Correction” though the
transmitting speed was changed

The transmitting speed setting applies to image transfer via cable
only. The speed for transfer of gamma values is fixed at 9,600 bps.

Summary of Contents for XG-P25X - Conference Series XGA LCD Projector








































































































Search results

Summary of Contents for XG-P25X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-P25X - Conference Series XGA LCD Projector

Brands by name

Popular brands

Sharp XG-P25X - Conference Series XGA LCD Projector, Operation Manual

Search results

Summary of Contents for XG-P25X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-P25X - Conference Series XGA LCD Projector

Brands by name

Popular brands