29
Adjusting and
Controlling
Multi
4
Set the Port Status.
If using the RS-232C connection, select the transmission speed
between the computer and the projector.
If using a LAN connection, input the projector’s IP address.
●
Set the transmission speed here and confirm the transmission speed
on the projector to the same speed.
●
For instructions on the projector’s transmission speed setting, refer
to the projector’s operation manual.
5
Select the projector model and check the “Use Projector”
check box.
6
Set the backup projector.
If necessary, set the backup projector. See
page 56
for details.
7
Click the “Apply” button.
Summary of Contents for XG-P25X - Conference Series XGA LCD Projector
Page 103: ...SHARP CORPORATION ...
