31
Adjusting and
Controlling
Single
5
Select the transmission speed between the computer and
the projector.
●
Set the transmission speed here and confirm the transmission speed
on the projector for the same speed.
●
For instructions on the projector’s transmission speed setting, refer
to the projector’s operation manual.
6
Click the “OK” button.
Single Projector Operation Mode
(For the connection via LAN)
1
Repeat steps 1 and 2 in “Single Projector Operation Mode
(For the connection via RS-232C or IrCOM)” (
page 30
).
2
Select “LAN” in “Connection Type”.
3
Input the IP Address.
4
Click the “OK” button.
LAN connections are possible only with models from the XG-V10 series
with the optional extension board (AN-L10T) installed.
Summary of Contents for XG-P25X - Conference Series XGA LCD Projector
Page 103: ...SHARP CORPORATION ...
