Sharp XG-NV5XE Operation Manual Download Page 19

Page: 19 / 54

E-18

Operation

Basic Operations

Connect the Power Cord

Plug the supplied power cord into the AC socket on the
back of the projector.

Turn on the Main Power

Press the

MAIN POWER

switch on the back of the

projector. The POWER indicator lights up red and the
projector enters standby mode.

• If the bottom filter cover is not securely installed, the POWER

indicator flashes.

• When the main power is not on, the “Power” remote control

cannot be used.

Turn on the Lamp Power

Press

POWER ON

on the projector or the “Power”

remote control.

• The flashing green LAMP REPLACEMENT indicator shows

that the lamp is warming up. Wait until the indicator stops
flashing before operating the projector.

• If the power is turned off and then immediately turned on

again, it may take a short while before the lamp turns on.

• After the projector is unpacked and turned on for the first

time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.

When the main power is on, the POWER indicator lights up
red.

When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.

Green:

Lamp is ready.

Flashing green:

Warming up.

Red:

Change the lamp.

Adjusting Focus

Slide the focus knob until the image on the screen
becomes clear.

Adjusting Zoom

Slide the zoom knob. The image can be adjusted to the
desired size within the zoom range.

Projector

MUTE

TOOLS

R-CLICK

ENTER

INPUT

IrCOM

FREEZE

AUTO SYNC

MENU

LASER

BLACK

SCREEN

VOL

OFF

XG-NV5XU (E)-c

98.11.20, 10:29 PM

Summary of Contents for XG-NV5XE























































Search results

Summary of Contents for XG-NV5XE

Reviews:

Related manuals for XG-NV5XE

Brands by name

Popular brands

Sharp XG-NV5XE, Operation Manual

Search results

Summary of Contents for XG-NV5XE

Reviews:

Related manuals for XG-NV5XE

Brands by name

Popular brands