Sharp XG-NV5XE Operation Manual Download Page 17

Page: 17 / 54

E-16

Setup & Connections

Computer
cable
(supplied)

Connecting the Projector

Connecting an IBM-PC

1. Plug one end of the supplied computer cable into

the COMPUTER INPUT port on the projector.

2. Plug the other end into the Monitor output port on

the computer.

3. Secure the plugs by tightening the thumb screws.

Connecting a Macintosh computer

1. Set the proper switches on the supplied Macintosh

adaptor to the desired resolution. Some examples
are as follows:
• For 640

⳯

480 resolution, set switches 1 and 2

to “ON” and 3, 4, 5 and 6 to “OFF”.

• For 832

⳯

624 resolution, set switches 2 and 4

to “ON” and 1, 3, 5 and 6 to “OFF”.

• For 1,024

⳯

768 resolution, set switches 2 and

3 to “ON” and 1, 4, 5 and 6 to “OFF”.

2. Connect the supplied Macintosh adaptor to the

supplied computer cable.

3. Connect the other end of the Macintosh adaptor

to the Monitor output port on your Macintosh
computer.

4. Plug the other end of the supplied computer cable

into the COMPUTER INPUT port on the projector.

5. Secure the plugs by tightening the thumb screws.

• Once the adaptor is connected to a computer and the

computer is turned on, the display mode cannot be changed
even if the switches on the adaptor are reset.

• The supplied Macintosh adaptor is only for use with H-SYNC

and V-SYNC output. When connecting a Macintosh
computer that only outputs C-SYNC, use a C-SYNC output
adaptor (sold separately).

Connecting other compatible com-
puters

When connecting the projector to a compatible com-
puter other than an IBM-PC (VGA/SVGA/XGA/SXGA/
UXGA) or Macintosh (i.e. Workstation), a separate cable
may be needed. Please contact your dealer for more
information.

• Connecting computers other than the recommended types

may result in damage to the projector, the computer, or both.

Turning on the power of the projector
and the computer

Once the connections are made, first turn on the
projector (see page 18), then your computer.

Connect your projector to a computer for projection of full-color computer images.

Macintosh
adaptor
(supplied)

Computer
cable
(supplied)

Macintosh adaptor (supplied)

佢
佣

OFF

XG-NV5XU (E)-b

98.11.20, 9:40 PM

Summary of Contents for XG-NV5XE























































Search results

Summary of Contents for XG-NV5XE

Reviews:

Related manuals for XG-NV5XE

Brands by name

Popular brands

Sharp XG-NV5XE, Operation Manual

Search results

Summary of Contents for XG-NV5XE

Reviews:

Related manuals for XG-NV5XE

Brands by name

Popular brands