X G - E 6 9 0 U B ( E ) / p p . 0 5 - 0 8
G. K . A s s o c i a t e s , To k y o
E-5
Remote Control Operation
Inserting the batteries
Remove the battery cover as shown and insert two AAA size batteries making sure the
polarity matches the (+) and (–) marks inside the battery compartment.
Notes:
Incorrect use of batteries may cause them to leak or burst.
• Insert the batteries with the (+) and (–) polarities as indicated.
• Remove the batteries if the remote control will not be operated for an extended period
of time.
• Maintain the batteries in clean condition.
• Do not mix different brands of batteries. The life expectancy of the new batteries will be
shortened and the old batteries may leak.
• When the batteries have been used up, remove them immediately to prevent leakage
and damage. Leaked battery fluid may irritate the skin. Remove any battery fluid by
wiping with a cloth.
• Due to storage conditions and the shelf life of the supplied batteries, they may run out
after a short time. Replace them with new batteries as soon as possible.
Slide out
Slide in
Press down
Battery cover
30
°
30
°
Max. distance : 23' (7m)
45
°
30
°
Transmission range
Reception range
Remote control positioning
Use the remote control as shown in the figures on the left.
Note:
• The signal from the remote control can be reflected off the
screen for easy operation. However, the effective distance of
the signal may differ due to the screen material.
ADJUSTMENT
TRANSMIT
ON/OFF
MUTE
LIGHT
VOL
INPUT
SELECT
MENU
E-Z
IN
LCD PROJECTOR
REMOTE CONTROL
POWER (ON/OFF) button
TRANSMIT indicator
VOLUME UP-DOWN buttons
ADJUSTMENT (
ƒ
/
∂
) buttons
(Can be used as ADJUSTMENT
(
ƒ
/
∂
) buttons when the MENU
button is pressed.)
REMOTE CONTROL SIGNAL TRANSMITTER
ADJUSTMENT (
ß
/
©
) buttons
INPUT SELECT button
E-ZOOM/PANNING button
MUTE button
LIGHT button
Using the remote control in
a dark room
Press the LIGHT button.
• This will cause the operation
buttons to stay lit for about 5
seconds.
MENU button
Remote control handling
precautions
Do not expose the remote control
to shocks, liquids or high
humidity.
The remote control may not
operate normally if exposed to
direct sunlight or other intense
light sources. Should this
happen, reposition the light
source or the LCD Projector.
1 9 9 8 / 5 / 2 1
