background image

Adjusting the Picture

E-16

• This projector’s picture is factory preset to standard

settings. However, you can adjust it to suit your own
preferences with the ADJUSTMENT buttons on the
projector and the remote control.

• The adjustment can be memorized in VIDEO or RGB

separately.

• Five picture modes can be adjusted: “PICTURE”,

“BRIGHT”, “COLOR”, “TINT” and “SHARPNESS”.

Adjusting the Picture

1. Use the MENU button to select the mode

to be adjusted.

• When the MENU button is pressed, the MENU mode is

indicated for about 30 seconds. Press the ADJUSTMENT

ƒ

/

buttons to select “VIDEO ADJ.       ”, then press the

MENU button.

2. Press the ADJUSTMENT 

ß

/

©

buttons.

• If the ADJUSTMENT 

ƒ

/

buttons are pressed while the

mode is indicated on the screen, the MENU mode changes
as shown.

• When the ADJUSTMENT (

ß

) or (

©

) buttons are pressed

while the mode you want to adjust is indicated, the “  ”
mark, which indicates the adjustment setting, can be
moved.

• The adjustment mode is indicated for about 10 seconds.

Description of Adjustment Items

Notes:

• When an RGB signal input has been selected, only

“PICTURE” “BRIGHT” “RED” and “BLUE” can be adjusted.

• TINT only appears in NTSC mode. 

3. Press the MENU button anytime to exit

VIDEO ADJ.

Checking Picture Adjustments

When the MENU button is pressed, the MENU mode is
indicated for about 30 seconds. Press the ADJUSTMENT

ƒ

/

buttons to select “VIDEO ADJ.        ”, then press the

MENU button.

• Each time you press the ADJUSTMENT 

ƒ

/

buttons while

the display is shown, the 

©

mark will move to indicate the

selected video status item for adjustment.

• When the ADJUSTMENT (

ß

) or (

©

) buttons are pressed,

the “  ” mark moves.

• The adjustment mode is indicated for about 30 seconds.

Selected item

PICTURE

BRIGHT

COLOR

TINT

SHARPNESS

RED

BLUE

RESET

ADJUSTMENT 

ß

button

To decrease contrast

For less brightness

For less color intensity

Skin tones become purplish

For less sharpness

For weaker red

For weaker blue

ADJUSTMENT 

©

button

To increase contrast

For more brightness

For more color intensity

Skin tones become greenish

For more sharpness

For stronger red

For stronger blue

All Video RGB Adjustment items are returned to the factory
preset settings. 

Note:

To reset all adjustment items, select RESET in “ADJ.  

” mode.

V I D E O                 -         0         +

P I C T U R E

: S E L .       : A D J .   M E N U : E N D

V I D E O                 -         0         +

S H A R P N E S S

: S E L .       : A D J .   M E N U : E N D

V I D E O                 -         0         +

B R I G H T

: S E L .       : A D J .   M E N U : E N D

V I D E O                 -         0         +

T I N T

: S E L .       : A D J .   M E N U : E N D

V I D E O                 -         0         +

C O L O R

: S E L .       : A D J .   M E N U : E N D

On-Screen Display

1

2

• TINT: NTSC only

V I D E O                 -         0         +

R E S E T

: S E L .       : A D J .   M E N U : E N D

S H A R P N E S S

T I N T

C O L O R

B R I G H T

P I C T U R E

When video mode is
selected.

• TINT: NTSC only

X G - E 6 9 0 U B   ( E ) / p p .   1 3 - 1 6

G. K .   A s s o c i a t e s ,   To k y o

1 9 9 8 / 5 / 2 1

V I D E O   A D J .        
V I D E O   A D J .        

B A C K G R O U N D   L E V E L

I M A G E   A D J .

S Y S T E M

: S E L .     : A D J .   M E N U : N E X T

L A N G U A G E

A U D I O   A D J .        

Summary of Contents for XG E690E/U




























Reviews: