Sharp XEA21S - Thermal Fax Machine Instruction Manual Download Page 67 | Manualshive

Page: 67 / 119

background image

65

If an error occurs while data is transferred from your cash register to the inserted SD memory card and vice
versa, it will be indicated by a corresponding error code shown on the operator display. Press the

l

key to

clear the error, then take the corresponding action.

SD error code table

In Case of SD Error

2

Recommended SD memory cards

We recommend you to use the following SD memory cards. If you want to use other card models, please visit
the Sharp web site: http://www.sharpusa.com.

Recommended card models:

SanDisk card models SDSDB-128-A10, SDSDB-256-A10, SDSDG-256-A10,
SDSDB-512-A10 and SDSDG-512-A10

• The data stored in an SD memory card could be lost or distorted due to accidents or other issues.

Sharp is not responsible for any damage incurred by lost data.

• 128-Mbyte to 512-Mbyte SD memory cards are available and the relationship between the

memory card capacity and the maximum holding period of sales data which can be saved in an
SD memory card is as follows:

Memory card capacity

Sales data holding period *

128MB

3 Months

256MB

6 Months

512MB

1 Year

*: This period refers to the time period during which sales data can be stored in an SD memory card

when additionally written onto it once a day.

Display

Error status and action

(Error code)

No SD memory card is found. Insert an SD memory card into the SD card slot or reinsert it correctly.

The write-protect switch on the SD memory card is in the “PROTECTED” position. Set the switch on the

“NOT PROTECTED” position.

The SD memory card is full. Delete unwanted data from the card on a PC or replace the card with a new

one. When using a new SD memory card, be sure to format it in advance.

The SD memory card has no desired data. Replace it with another SD memory card containing the

desired data.

The data stored in the SD memory card is incorrect. Write correct data into the SD memory card on a

PC.

The maximum allowable number of times of sales data or EJ data writing is exceeded. Delete unwanted

data from the SD memory card on a PC or replace the card with a new one. When using a new SD

memory card, be sure to format it in advance.

A power failure has occurred while the SD memory card is accessed. Perform the interrupted operation

again from the beginning after power recovery.

An error other than the above mentioned has occurred while the SD memory card is accessed. Perform

the interrupted operation again from the beginning.

«
...
65
66
67
68
69
...
»

Summary of Contents for XEA21S - Thermal Fax Machine
























































































































Reviews:

No comments

Related manuals for XEA21S - Thermal Fax Machine

Brand: National Cash Register Pages: 22

Brand: NanoEnTek Pages: 4

Brand: V-Count Pages: 71

Brand: MegaCount Pages: 23

Brand: PAX Pages: 15

Brand: Omron Pages: 22

Brand: Abra Pages: 5

Brand: Parker Pages: 32

People Counting L

Brand: TeraBee Pages: 19

Brand: PRO Intellect Technology Pages: 12

Codix 13 Series

Brand: Kübler Pages: 34

Brand: oneConcept Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands