43
*
1:
Item:
Selection:
Entry:
A
Footer printing*
Allow
1
Disallow*
0
B
Amount tendered entry*
Compulsory
1
Non-compulsory (for
X
,
Y
and
A
)*
0
Inhibit (for
c
and
b
)*
0
C
Entry digit limit
For
X
,
Y
,
c
,
b
and
A
0-8 (default:8)
For
r
and
o
0-9 (default:9)
*When programming for
r
or
o
, always enter 0 for A and B.
Footer printing (only for
X
,
Y
,
c
,
b
and
A
)
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section on page 46.
Amount tendered entry (only for
X
,
Y
,
c
,
b
and
A
)
• You may select amount tendered, compulsory or optional, for the
A
,
X
and
Y
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
and
b
keys.
Entry digit limit
• For the
X
,
Y
,
c
,
b
,
r
and
o
keys program upper limit entry amount for the tendered amount. For
the
A
key, program upper limit entry for total cash amount which can be handled on the register. The entry
digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is
represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the
operation of the corresponding key is prohibited.
The register allows you to program texts for department item names, PLU/subdepartment item names, function
texts, clerk names, logo messages, foreign and domestic currency symbols, and training mode texts. Please
refer to “Guidance for text programming” on page 31 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
P
key for text entry just after you
start programming with the
s
key, the cash register will automatically be ready for text entry.
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter, such as dept. code. Referring to the corresponding “Procedure”, enter a
parameter and start character entries.
Department text (item label)
(16 digits)
s
P
1
d
s
To program another dept.
To keep current setting
Dept. key
Character keys
(max.16 digits)
Dept. code
(1 to 50)
A
Text Programming
4
From left, ABC
018
@
X A
Key operation example
A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 43
