Display
Six digits, 0.4 Inch seven segment LED
User programming
3 Keys & Display
One relay, 1 c/o
Output
Relay contact rating
10 A @ 230 VAC
(Resistive load)
/ 30 VDC
Power consumption
4.8 VA
Reset : Auto / Manual
Auto reset Time 000.1 Sec to 999.9 Sec
Range
999 999 Counts
Count direction
Up
SPECIFICATIONS
Supply voltage
230 VAC
Weight
170 grams
Dimension
( L x W x D )
96 x 48 x 75
Mechanical life of relay
Electrical life of relay
Ambient temperature
Ambient humidity 35 to 85 % RH
Storage temperature
10 million operation
100000 operation
-10 to 55 c
-25 to 65 c
Operating voltage range + / -10% from the rated voltage
In the pack counter, side clamp and instruction manual
Input NPN (or) PNP Proximity unit (Selectable)
Pulse frequency Low : Less than 30 Hz & High : More than 30 Hz
Special feature Memory Retension
Indications Input Pulse and Relay ON
Set points Two (Count and auto reset time)
GPM - 303
All dimensions are in mm
90
45
75
10
INTRODUCTION
WIRING DIAGRAM
PANEL CUTOUT DIMENSION
MANUFACTURER
PRECAUTION FOR SAFE USE
NOTE:
F
DIMENSIONS
1. Our company shall not be liable for any damages, as described
below, caused to both
any users and third parties
a) Damages caused by the result of operation of the product.
b) Damages caused by any defects in the product which are
unpredictable for us.
2. The content in this manual are subject to change without any
notice. If you have any suggestion on the matter,
Please do not hesitate to contact us.
(4) Separate the input signal devices, input signal cables
and the product from the source
of noise or high - tension
cables producing noise
(5) The supplied power voltage and load must be within the
rated and specified ranges.
(6) Do not use where the water or oil splatter on the Timer
(7) Install a switch or circuit breaker that allows the operator
to immediately turn off the power
(1) Use and store the Timer within the specified
ambient temperature and humidity ranges.
(2) Do not use the product in location subject to vibrations
or shocks. Using the product in such location over a long
period may result in damage due to stress.
(3) Do not use the product in locations subject to dust,
corrosive gases, or direct sunlight
Thank you very much for purchasing this GREEN product
GPM-303. Please read the instruction manual carefully for
the full usage of this product
The
has passed various quality tests before despatch.
COUNTER
Please check however, at the time of arrival, its model code
and its appearance and ensure that all the contents are provided
and there are no faults, damage etc, to the timer. Please also
ensure that the model code ,which is labeled on the timer,
is identical to the one you ordered.
48
96
GPM - 303
PROGRAMMABLE COUNTER
GREEN
SET
I / P PULSE
RELAY
GREEN MICROELECTRONICS INDIA PVT. LTD.
green@green
.in
electronics
www.greenelectronics.in
0422-2590288
PROGRAMMABLE COUNTER
V1.2
1
9
2
3
4
10
5
11
13
6
7
8
14
16
SENSOR
MANUAL
RESET
O / P
15
12
LED
GREEN
NPN / PNP
PROXIMITY
+
-
E
P
N
24 VDC
OUTPUT
100 - 240 VAC, 50HZ
SUPPLY
RELAY
NO
C
NC
