Sharp ViewCam Slim VL-AX1H Operation Manual Download

Page: 86 / 115

Digital Still Camera Features
Camera Recording

Digital Still Camera

Features

Selecting Flash Mode

AUTO:

Flash automatically fires in dark

locations (when “LIGHT” is displayed on
the screen) each time you press the STILL
button.

ON:

Flash fires every time you press the

STILL button.

Mount the IR & Flash Light to the
camcorder and then set the POWER
switch on the IR & Flash Light to
FLASH.

In CARD-CAMERA mode, press the
MENU button until the menu screen
appears.

Turn the CONTROL dial to select

then press the dial.

Turn the CONTROL dial to select
“FLASH”, then press the dial.

Turn the CONTROL dial to select
“AUTO” or “ON”, then press the dial.

Press MENU button until the menu
screen turns off.

• The

indicator appears.

Caution:

•

You should never use the flash with the
camcorder close to another person.

Notes:

• The

indicator flashes while the flash is being

charged.

• If you press the STILL button while the

indicator is flashing, flash does not fire but a still
image of the subject is recorded.

C AME R A

R E C MO D E

I MA G E S I Z E

F L A S H
R E T UR N

S E T

A U T O

O N

S E L F

T I ME R

F L A SH

Using the Flash Light
(Optional Accessory)

Available mode:

CARD-CAMERA

Using the flash function of the optional IR &
Flash Light VR-3VIF enables you to record
good-quality still images even in dark locations.

Mounting

Align the IR & Flash Light with the
accessory shoe on the camcorder, and
slide it in the direction of the arrow until
it locks into place.

Turn the screw in the direction of the
arrow to secure the IR & Flash Light.

Removing

Turn the screw in the opposite direction than
when mounting, then pull off the IR & Flash Light.

Caution:

•

Do not pick up the camcorder by the IR & Flash
Light, as this may damage the equipment.

Notes:

• Using the optional IR & Flash Light VR-3VIF will

shorten the continuous camera recording time
with the battery pack.

• For details, see the operation manual of the

optional IR & Flash Light.

• The IR light cannot be used, even if the VR-3VIF

is mounted on the camcorder.

E C ON OMY

]

[ 1 1 5 2

CARD

9 3 1

Accessory
shoe

Flash indicator

Screw

VL-AX1H-071-076

01.11.1, 11:13 AM

Summary of Contents for ViewCam Slim VL-AX1H




















































































































Search results

Summary of Contents for ViewCam Slim VL-AX1H

Reviews:

Related manuals for ViewCam Slim VL-AX1H

Brands by name

Popular brands

Sharp ViewCam Slim VL-AX1H, Operation Manual

Search results

Summary of Contents for ViewCam Slim VL-AX1H

Reviews:

Related manuals for ViewCam Slim VL-AX1H

Brands by name

Popular brands