manualshive.com logo in svg

Sharp VC-H680X, Operation Manual, Page: 32 / 39

Share
Download
Sharp VC-H680X Operation Manual Download Page 32

 Intelligent Timer Recording (JUST REC)

.

When the 

tape is expected to run out halfway during timer recording (except for the Simple Recording Timer) in

the SP (standard play) mode, the mode will automatically change to the LP (long play) mode to prevent
termination of recording.
This function works only when JUST REC mode on the MODE selection screen is set to ON.

For example:

l 

When a 

 programme is timer-recorded with a 

 tape while the automatic select is set to LP

mode as shown below.

 About 60 minutes 

 

 About 30 

SP (standard play) mode

LP (long play) mode

I

Total: 

120 

minutes

l 

JUST REC does not function when recording programmes in NTSC mode.

l 

This function may not properly work for video tapes other than E-60, E-90, E-180 and E-240.

l 

This tape may not be completely used up.

l 

When more than one programme is set on the timer, the automatic recording function will work for the length of each 

set programme, but not for the total length of all programmes.

l 

When the LP mode is initially used for timer-recording a programme, if the tape 

IS

 not long enough to record the entire length

of the programme, the programme will not be entirely recorded.

3 2

Summary of Contents for VC-H680X








































Reviews:

No comments