Setting the Channels
, and
to 69. Your VCR has 48 programmabie
channel positions, each of which can be set to any of the above broadcast channels, The channel positions
have been preset at the factory as shown below.
AUTO TUNING
PREPARATION
. Use the buttons on the remote control to set
the OSD.
l
Channel position numbers 0, 3 to 6, 8, 11 to 27, and 29
to 47 have been factory set to be skipped when
CHANNEL
or (CH or
is used.
l
If the picture is not clear, if you want a different channel
from the one
or if vou wish to reset a skiooed
channel, reset the channel as follows
l
Select the video channel on your TV and turn on the VCR. (See page 5, item 3.)
A SET
0
SET
Press MENU.
Select item “CHANNEL PRESET” with
and press
SET.
Normal
Screen
Select item “AUTO” with
and press SET
The channel display on the TV screen will continue
through all of the channels and when finished, the TV
screen will return to the normal screen.
The bar display indicates the estimated amount of
channels tuned.
l
If additional unwanted channels were found, refer to page 16 to skip unwanted channels
l
If some channels were unable to be found, refer to
Manual Tuning on
page 15.
14