Programming the Timer with
This VCR has the G-CODE Programming System. By simpiy inputting the
with the
numeric
buttons, you can programme your VCR for timer recording.
The G-CODE numbers are listed in most newspaper, TV guide, and local cable TV listings.
The timer can be set for automatic recording of up to 8 events over a
period. In addition, each of the
events can be set to be recorded on a daily or weekly basis up to the limit of the tape.
PREPARATION:
l
Select the video channel on your TV. Turn on the VCR. (See page 5,
3.)
l
Load the cassette, ensuring the erasure protection hole is covered. The VCR power will automatically turn
on.
l
Check that the clock is displaying the correct time.
CODE number, refer to your newspaper or TV guide
ODE
to directly select this screen.
If you want to record only once, press SET and g
step
Otherwise, press or to select daily/we
setting mode, and then select “DAILY” or “WEEKLY
pressing
And then press SET.
To record only once.
To record every day at the same time.
“WEEKLY”:
To record every week at the same time.
nto.
SPEED
l
Standard Play
,
* EP: Extended Play
(only NTSC Tape)
Continued on next page
27