Sharp UX-A460 Operation Manual Download Page 56

Page: 56 / 103

Sending a Fax by Automatic Dialling

Press .

Return to Step 2 to edit or clear another number, or press

return to the date and time display.

START/MEMORY

STOP

Using an auto-dial number

Once you have stored a fax or phone number, you can use it to send a fax or
make a phone call.

If you are sending a fax, load the
document(s).

•

If desired, press

to set the

resolution and/or contrast.

Press

(or

) until the name of the other party appears in the

display (if no name was stored, the number will appear).

If you are sending a fax, press

. Dialling and transmission

begins.

•

If the transmission is completed successfully, the fax will beep once.

•

If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 81).

If you are making a phone call, lift the handset. Dialing begins.

RESOLUTION/

RECEPTION MODE

START/MEMORY

READY TO SEND

all.book

Page 54

Tuesday, July 15, 2003

9:53 AM

Summary of Contents for UX-A460








































































































Search results

Summary of Contents for UX-A460

Reviews:

Related manuals for UX-A460

Brands by name

Popular brands

Sharp UX-A460, Operation Manual

Search results

Summary of Contents for UX-A460

Reviews:

Related manuals for UX-A460

Brands by name

Popular brands