Sharp UX-A460 Operation Manual Download

Page: 10 / 103

Monitoring phone conversations

When speaking through the handset, you can press

to allow a third

person to listen to the conversation through the speaker. (To turn off the
speaker, press the key again.)

To adjust the volume of the speaker when monitoring a conversation, press

(the volume reverts to the lowest setting each time the handset is

replaced).

Note that

the speaker cannot be used for speaking

; it is only for listening.

To avoid feedback (a loud howling sound), be sure to turn off the speaker

(press

once again) before you replace the handset.

REPEAT key

Press this key while listening to a message to play it again (page 29).

SKIP key

Press this key while listening to a message to skip to the next message (page
29).

DELETE key

Press this key to erase recorded messages (page 30).

all.book

Page 8

Tuesday, July 15, 2003

9:53 AM

Summary of Contents for UX-A460








































































































Search results

Summary of Contents for UX-A460

Reviews:

Related manuals for UX-A460

Brands by name

Popular brands

Sharp UX-A460, Operation Manual

Search results

Summary of Contents for UX-A460

Reviews:

Related manuals for UX-A460

Brands by name

Popular brands