Sharp UX-485, Operation Manual

Page: 69 / 115

67
6. M
a
k
ing
Phone Cal
ls
6. Making Telephone Calls
Your fax can be used like a regular telephone to make and receive voice calls.
♦
To make or receive a phone call, the power must be on.
1
Pick up the handset or press the
SPEAKER key. Listen for the dial
tone.
2
Dial the number using one of the
following methods:
•
Normal Dialling: Enter the full
telephone number with the numeric
keys.
•
Rapid Key Dialling: Press the
appropriate Rapid Key.
•
Speed Dialling: Press the SPEED
DIAL key, and enter the 2-digit
Speed Dial number with the
numeric keys.
or
SPEAKER
3
Speak with the other party when
they answer.
•
If you pressed the SPEAKER key,
pick up the handset to talk.
Comments:
♦
While the handset of the fax is lifted
(off hook), an extension phone
connected directly to the fax cannot
be used to speak with the other
party.
♦
The fax may interrupt a voice call
received on an extension phone if
the reception mode is set to A.M.
and there is a period of silence
during the conversation. If you are
on a tone dial phone, you can
prevent this by pressing any three
keys on the phone immediately
after you answer. (Note: Do not
enter the code to activate fax
reception: 5,
*
,
*
.)
2
5
8
GHI
JKL MNO
TUV WXYZ PQRS
ABC DEF
1
4
7
3
6
9
all_ux485gg.book Page 67 Thursday, May 10, 2001 1:32 PM