— 245 —
Automatic Sequencing Key Programming
If you program AUTO keys (automatic sequencing keys) for frequently performed key operations, you can enter
those key operations simply by pressing the corresponding AUTO keys.
Procedure
To program automatic sequencing keys as follows:
1.
Select the automatic sequencing key which you want to program.
2.
Enter the desired sequence for the automatic sequencing key in the
programmed sequence.
750
4
CA/AT
3.
To end programming for the key, touch “EXIT” in the lower left corner
of the display.
4.
To program another automatic sequencing key, repeat the above
steps.
5.
To end programming automatic sequencing keys, press the key.
Select “03 AUTO KEY” from the
PGM2 window.
Summary of Contents for UP-810F
Page 1: ...The above illustration shows the UP 820F ...
Page 70: ... 68 Example B S 101 GLU 102 GLU 2 ENTER CA AT B S Touch the item for bill splitting ...
Page 258: ... 256 Optional features PGM2 mode To be continued Report type Setting ...
Page 264: ... 262 Direct key PGM2 mode Report type Key no PLU code ...