Sharp TL-M5200 Operation Manual Download Page 35

Page: 35 / 76

Operation

OPC (Optical Picture Control) setting

You can set the monitor to automatically adjust the
screen to suitable backlight brightness according to
the lighting conditions.

OPC indicator

Selectable

items

Description

On(Display)

Displays the OPC effect on
the screen while adjusting the
brightness of the screen.

Automatically adjusts

Off

The brightness is fixed at the value
set in “Backlight” (See page

OPC indicator

Light off

“Off” is selected in the OPC
setting.

Lighted (Green) “On” or “On(Display)” is selected

in the OPC setting.

• Make sure no object obstructs the OPC sensor, which

could affect its ability to sense surrounding light.

Note

Advanced picture settings

The advanced settings enable you to set the picture
adjustment in more detail. There are 6 options you
can choose from.

Color Temp. (Color Temperature)

Adjusts the color temperature to give the best white
image.

Selectable

items

Description

High

White with bluish tone

Mid-High
Middle
Mid-Low
Low

White with reddish tone

DNR (Digital Noise Reduction)

Reduces noise on the screen and produces a
clearer video image.

Film Mode

Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.

• This model is not compatible to 1080/24p input signal.

Note

Black

For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.

Selectable

items

Description

For high detail in black portions

Off

No adjustment

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.

Selectable

items

Description

Standard

Normal adjustment

Fast

For movie image

Slow

For still image

Off

3D-Y/C off

• 3D-Y/C is not selectable depending on the input signal

type.

• 3D-Y/C may not operate depending on the input signal

type or noisy input signal.

Note

Monochrome

For viewing images in monochrome.

Menu operations

Summary of Contents for TL-M5200













































































Search results

Summary of Contents for TL-M5200

Reviews:

Related manuals for TL-M5200

Brands by name

Popular brands

Sharp TL-M5200, Operation Manual

Search results

Summary of Contents for TL-M5200

Reviews:

Related manuals for TL-M5200

Brands by name

Popular brands