Sharp SW-180NC, Instruction Manual

Page: 55 / 126

4-23
Picture B : Deviation Value Display
(Shown on HMI display)

Make the proximity sensor connect
with power & adjust the proximity
sensor until the blade deviation
displayed on the control panel is 0
mm
。

Tolerance: ±0.03 mm (0.0012”)
。
Picture C: Deviation Value Set-Up & On/Off
button
(Shown on HMI display)

Deviation Value Set-Up:
-
Set up the tolerance of deviation
value; if the value out of range
when blading for 15 seconds, the
machine will be automatically full
stopped with alarm message.

Deviation Detecting On/Off button:
- Turn On/Off the deviation detecting
function.
Deviation Value
Deviation Value Set-
Up
Deviation Detecting
On/Off button