19
E
E
E
E
E
STEP-BY-STEP INSTALLATION GUIDE
Turn two full turns on each screw
Cabinet mounting bolt
Washer
The Filler Block is only used for recessed cabinet and front
overhang cabinet (see the type of the cabinet on pages 8 - 9). Place
the Filler Block to the cabinet bottom before installing the oven.
5.
Tighten the outer two screws to the top of the microwave oven.
While tightening screws, hold the microwave oven in place against
the wall and the top cabinet.
Cabinet front
Equivalent to
depth of cabinet
recess
Cabinet bottom
Filler block
Cabinet mounting bolt
Microwave oven top
Washer
6.
Install grease filters. See the Operation Manual included with
the microwave.
C5.
CHANGE THE CHARCOAL FILTER
The charcoal filter is used for nonvented, recirculated installation.
The filter should be changed every 6 to 12 months depending on use.
1.
Remove two screws of the louver on the top of the oven by using
a #1 Phillips screwdriver.
Charcoal Filter
Louver
Louver Screws
2.
Open the door, remove the louver and take the used charcoal
filter out.
Charcoal
Filter
3.
Install the new charcoal filter. When properly installed, the wire
mesh of the filter should be visible from the front.
4.
Replace the louver and the screws.
