E-11
SD-AS10W_EX_E.fm
05/3/18
ENGLISH
TINSZA124AWZZ
SD-AS10W
Pr
epara
tion f
o
r Us
e
- S
yst
em
in
st
alla
ti
o
n
-
System installation
You can attach the floor speaker stand (optional accessory) to the front and surround
speakers.
(For details on the optional accessory, refer to page 61.)
"
Magnetically shielded speakers
The front, surround and centre speakers may be placed beside or near the TV as
they are magnetically shielded. However, discolouration may occur depending on the
TV type.
If colour variation occurs...
Turn off the TV (with the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
Refer to the manual of the TV for details.
Note:
The subwoofer is not magnetically shielded.
"
Placing the speaker system
The best surround effect will be achieved by placing each speaker at the same
distance from the listening position.
It is recommended to arrange the speakers as shown below.
Notes:
!
The default distance is set to 2 m (6 feet). If speakers cannot be placed at equal
distances, refer to "Speaker delay setting" (see page 43).
!
Place the TV halfway between the front speakers.
!
It is recommended that the centre speaker be placed near the television.
!
Place the surround speakers at a position just above the height of your ears.
!
You can place the subwoofer anywhere you like. As it vibrates whilst reproducing
bass, place it on a stable, sturdy surface.
Installation image (with optional accessories):
Front
speaker
(right)
Surround
speaker
(right)
Surround
speaker
(left)
Subwoofer
Front
speaker
(left)
Centre speaker
Front
speaker (left)
Subwoofer
Front
speaker (right)
Surround
speaker (left)
Surround
speaker (right)
Default setting:
2 m (6 feet)
Centre
speaker
Centre speaker
Front speaker
(left)
Front speaker
(right)
Same distance
