GB-19
ENGLISH
BEFORE
OPERATION
MICROWAVE POWER LEVELS
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.
SETTING
THE
CLOCK
There are two setting modes: 12 hour clock and 24 hour clock.
1.
To set the 24 hour clock, press the
CLOCK/DELAY START
button once and “24H” will appear in the display. To
set the 12 hour clock, press the
CLOCK/DELAY START
button once more and “12H” will appear in the display.
2.
Rotate the
ENTRY
dial until the correct hour is displayed, the input time should be within 0-23 (24-hour
clock) or 1 -12 (12-hour clock).
3.
Press the
CLOCK/DELAY START
button, the minute fi gure will fl ash.
4.
Set the minutes. Rotate the
ENTRY
dial until the correct minutes are displayed, the input time should be
within 0-59.
5.
Press the
CLOCK/DELAY START
button once to start the clock. The icon “:” of the digital time will be fl ashing
on the display.
NOTES:
•
If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will show "0:00".
•
To check the time of day during a cooking process, press
CLOCK/DELAY START
button and the LED will
display the time of day for 2-3 seconds. This does not aff ect the cooking process.
•
In the process of clock setting, if the
STOP/CLEAR
button is pressed, the oven will go back to the former setting.
•
If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the
power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.
Power Level
Press the
MICRO.
POWER
button
Display
(Percentage)
Display
(Indicators
that light up)
•
Your oven has 5 power levels, as shown.
•
To change the power level for cooking, press
the
MICRO. POWER
button or rotate the
ENTRY
dial key until the display indicates the
desired level. Press the
START/+30sec./ENTER
button to confi rm, enter the cooking time and
then press the
START/+30sec./ENTER
button
to start the oven.
•
To check the power level during cooking, press
the
MICRO. POWER
button, the current power
level will be displayed for 2-3 seconds. The oven
continues to count down although the display
will show the power level.
HIGH
x1
P100
(100%)
MEDIUM
HIGH
x2
P80
(80%)
MEDIUM
x3
P50
(50%)
MEDIUM LOW
(DEFROST)
x4
P30
(30%)
LOW
x5
P10
(10%)
Generally the following recommendations apply:
P100
- (HIGH output = 900W) used for fast cooking or
reheating e.g. for casseroles, hot beverages, vegetables
etc.
P80
- (MEDIUM HIGH output = 720W) used for longer
cooking of dense foods such as roast joints, meat loaf
and plated meals, also for sensitive dishes such as
sponge cakes. At this reduced setting, the food will
cook evenly without over cooking at the sides.
P50
- (MEDIUM output = 450W ) for dense foods
which require a long cooking time when cooked
conventionally, e.g. beef casserole, it is advisable to use
this power setting to ensure the meat will be tender.
P30
- (MEDIUM LOW output = 270W Defrost setting)
to defrost, select this power setting, to ensure that
the dish defrosts evenly. This setting is also ideal for
simmering rice, pasta, dumplings and cooking egg
custard.
P10
- (LOW output = 90W) for gentle defrosting, e.g.
cream gateaux or pastry.