R-7500AT
5
PRODUCT SPECIFICATIONS
* This Product fulfils the requirement of the European
AC Line Voltage ................... Single phase 230 V, 50 Hz
AC Power Required ............. 2.85 kW
12.2
A
Output Power ....................... 1800 W (IEC 60705)
Sound level .......................... less than 70dB (A)
Outside Dimensions ............ 420(W) x 337(H) x 480(D) mm
Microwave Frequency .......... 2450 MHz* (Group 2 / Class B)
standard EN55011. In conformity with this standard,
this product is classified as group 2 class B equipment.
Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of
electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable
to be used in domestic establishments.
This product is designed for commercial application
only and as such it falls outside the scope of Regulation
(EC) 1275/2008 implementing EU Directive 2005/32/EC
on eco-design requirements for standby and off mode
electric power consumption. Sharp do not recommend
the product for domestic application and will not accept
any liability for such use.
(Single)
420(W) x 674(H) x 480(D) mm
(Two ovens stacked)
Cavity Dimensions ............... 332(W) x 171.5(H) x 330(D) mm
Oven Capacity ..................... 19 litres
Weight ................................. Approx. 20kg
Cooking Uniformity .............. Rotary antenna system
• As part of a policy of continuous improvement, we reserve
the right to alter design and specification without notice.
NOTE: External Equipotential Earthing Terminal
Equipment has secondary ear thing terminal.
Terminal provides external earthing connection
used in addition to earthing prong on plug. Located on
outside of oven back, terminal is marked with symbol
shown on the right side.
SPECIFICATIONS
COMMERCIAL MICROWAVE OVEN
Equipotential marking
OTHER COMMERCIAL
ELECTRICAL APPLIANCE
Washer
Lead wire
Screw
Equipotential earthing
terminal
Lead wire
Earth angle
(Equipotential earthing terminal)
Fig. A-1
INSTALLATION INFORMATION
When this commercial microwave oven is installed near other commercial electrical appliances, connect a lead wire
to each equivalent potential terminal with equipotential marking between them (insert a lead wire between a washer
and an earth angle, and screw them), as shown in Fig. A-1, to make sure that they are at equivalent potential.
If any lead wire is not connected between them, when person touch them he/she will get a electric shock.