2
YOUR OVEN AND ACCESSORIES
1
2
9
4
6
7
8
5
OVEN:
1. Front trim
2. Oven lamp
3. Control panel
4. Waveguide cover (DO NOT REMOVE)
5. Seal packing
6. Oven cavity
7. Door seals and sealing surfaces
8. Door latches
9. Door opening handle
10. Fixing points (4 points)
11. Ventilation openings
12. Outer cover
13. Rear cabinet
14. Power cord support clip
15. Power cord
3
16
17
ACCESSORIES:
Check to make sure the following accessories are
provided:
16. Turntable
17. Roller stay
18. 4 fixing screws (not shown)
• Place the roller stay in the seal packing on the
floor of the cavity, then place the turntable on
to the roller stay, ensuring it is located firmly.
• To avoid turntable damage, ensure dishes or
containers are lifted clear of the turntable rim
when removing them from the oven.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
is not damaged.
• After cooking fatty foods without a cover, always clean the cavity thoroughly, this must be dry and
free from grease. Built-up grease may overheat and begin to smoke or catch fire.
• Always operate the oven with the turntable and roller stay fitted correctly. This promotes thorough,
even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage
to the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
• When you order accessories, please quote both the PART NAME and MODEL NUMBER to
your dealer or SHARP approved service facility. The model number is located at the bottom of the
control panel.
WARNING:
The door, front trim, oven cavity, turntable and dishes will become very hot during
operation. To prevent burns, always use thick oven gloves.
15
14
11
10
12
13
R-32FBSTM Operation Manual 24/06/2004 09:03 Page 2