Sharp PN-465U, Operation Manual

Page: 32 / 76

E
30
PICTURE menu
Function Command Direction Parameter Reply Control/Response contents *
AUTO AGIN W 1 When the input mode is PC2, PC3. No
CONTRAST CONT WR 0-60 0-60 0-127 on PC2/PC3.
Yes
BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC2/PC3.
TINT TINT WR 0-60 0-60 When the input mode is AV.
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
ADVANCED FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
Yes
3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
MPEG-NR MPNR WR 0-1 0-1 0: OFF, 1: ON
3D-Y/C YCSP WR 0-1 0-1 0: OFF, 1: ON
COLOR MODE BMOD WR 0 0 STD
Yes 2 2 VIVID
3 3 sRGB (When the input mode is PC)
WHITE BALANCE THRU CTMP WR 0 0 When the input mode is PC1.
Yes
PRESET 1-15 1-15 From 1: approximately 3,000K to 15: approximately 10,000K
(500K steps)
USER 99 99
R-CONTRAST CRTR WR 0-512 0-512 “ERR” when CTMP is not set to 99.
G-CONTRAST CRTG WR 0-512 0-512
B-CONTRAST CRTB WR 0-512 0-512
GAMMA GAMM WR 0-2 0-2 0: 1.8, 1: 2.2, 2: 2.4 Yes
RESET ARST W 2 No
AUDIO menu
Function
Command Direction Parameter Reply Control/Response contents *
TREBLE AUTR WR -10-10 -10-10
Yes
BASS AUBS WR -10-10 -10-10
BALANCE AUBL WR -10-10 -10-10
RESET ARST W 3 No
SETUP menu
Function Command Direction Parameter Reply Control/Response contents *
SCREEN MOTION SCSV WR 0-4 0-4 0: OFF, 1-4: PATTERN 1-4 Yes
MOTION TIME 1 MTIM WR 0-20 0-20 Yes
MOTION TIME 2 PATTERN 1 MINT WR 10-990 10-990 Per 10 seconds
Yes
PATTERN 2-4 MINT WR 5-20 5-20 Per second
MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT Yes
LANGUAGE LANG WR 14 14 ENGLISH
Yes
1 1 DEUTSCH
2 2 FRANÇAIS
3 3 ITALIANO
4 4 ESPAÑOL
5 5 РУССКИЙ
6 6
ID NUMBER ID NO. SETTING IDST W 0-255 Sets the monitor’s ID number. (“0” means “no ID number”.)
Yes
R 0-255 Returns the monitor’s ID number.
ID NO. SETTING
(ONCE) IDSL W 1-255 Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
Yes
0 Clears the ID number if one has been designated.
ID NO. SETTING
(SUBSEQUENT) IDLK W 1-255 Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands
after this command.
Yes
0 Clears the ID number if one has been designated.
ID CHECK IDCK W 0 ID : xxx
IDLK : yyy
Displays monitor’s own ID number and the selected ID number on the
screen.
Yes
PICTURE FLIP PFIL WR 0-3 0-3 0: OFF, 1: MIRROR, 2: UPSIDE DOWN, 3: ROTATE Yes
Power On Delay PWOD WR 0 0 OFF
Yes
1-60 1-60 ON
Controlling the Monitor with a PC