Sharp PN-40TC1 Operation Manual Download Page 36

Page: 36 / 50

Your monitor can be connected to a LAN allowing you to

control it from a computer on the LAN.

The connection requires a commercially available LAN cable

(UTP cable, Category 5, straight through).

LAN terminal

LAN cable (commercially available, straight)

Network (LAN)

Hub

TIPS

• You must assign an IP address to the monitor by following

the procedures in “Settings to connect to a LAN”. (See the

description on the right.)

• When POWER SAVE MODE is set to ON, control is not

possible in standby mode.

• To control the monitor via LAN, set RS-232C/LAN SELECT

to LAN. (See page 27.)

• You cannot use RS-232C and LAN control simultaneously.

Controlling the Monitor with a computer (LAN)

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the

settings of your LAN.

The settings depend on the configuration of your LAN. Ask

your LAN administrator for details.

Set RS-232C/LAN SELECT on the SETUP menu to LAN, and

then set the LAN SETUP options. (See page 27.)

After setting each item, select SET in SET/RESET and press the

ENTER button.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

Press the or button to select items, and press the or

button to change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

Press the or button to select items, and press the or

button to change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default

gateway.

If you are not using a default gateway, specify “0.0.0.0”.

Press the or button to select items, and press the or

button to change the values.

SET/RESET

SET ....................Applies the LAN settings to the monitor.

RESET ...............Resets the LAN settings to the factory

preset values.

Summary of Contents for PN-40TC1



















































Search results

Summary of Contents for PN-40TC1

Reviews:

Related manuals for PN-40TC1

Brands by name

Popular brands

Sharp PN-40TC1, Operation Manual

Search results

Summary of Contents for PN-40TC1

Reviews:

Related manuals for PN-40TC1

Brands by name

Popular brands