Sharp PN-40TC1, Operation Manual

Page: 34 / 50

34
E
Controlling the Monitor with a computer (RS-232C)
AUDIO menu
Function Command Direction Parameter Reply Control/Response contents
VOLUME VOLM WR 0-31 0-31
SETUP menu
Function Command Direction Parameter Reply Control/Response contents
RS-232C/LAN SELECT CTLS WR 0-1 0-1 0: RS-232C 1: LAN
LAN SETUP DHCP CLIENT DHCP WR 0-1 0-1 0: OFF, 1: ON
* Apply the settings to this monitor by NTUP.
IP ADDRESS IPAD WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
Example: 192168150001
* Apply the settings to this monitor by NTUP.
SUBNET MASK SBMK WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
Example: 255255255000
* Apply the settings to this monitor by NTUP.
DEFAULT
GATEWAY DFGW WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than 3 digits, to 3 digits to fill 0.
Example: 000000000000
* Apply the settings to this monitor by NTUP.
User name USER WR XXXXXXXX XXXXXXXX Set the username for connection to this monitor by LAN.
X: 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field can be left blank, but spaces cannot be entered.)
Password PASS WR XXXXXXXX XXXXXXXX Set the password for connection to this monitor by LAN.
X: 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field can be left blank, but spaces cannot be entered.)
Monitor name MNTR WR XXXXXXXX
XXXXXXXX XXXXXXXX
XXXXXXXX X: 16 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field can be left blank, but spaces cannot be entered.)
Auto logout time LOTM WR 00000-65535 00000-65535 Set the time that display terminate a network connection automatically by minutes.
Data port TCPP WR 01025-65535 01025-65535 Set the TCP port number for data communication.
* Apply the settings to this monitor by NTUP.
Reflecting LAN setting NTUP W 1 1 Applies the DHCP CLIENT, IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY,
and Data port settings to this monitor.
Crestron Connected CRCN WR 0-1 0-1 0: OFF, 1: ON
ALL RESET RSET W
1 1: ALL RESET
MONITOR menu
Function Command Direction Parameter Reply Control/Response contents
PORTRAIT/LANDSCAPE INSTALL STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT
HORIZONTAL INSTALLATION MLAY WR 0-1 0-1 0: OFF, 1: UPWARD
PIP menu
Function Command Direction Parameter Reply Control/Response contents
PIP MODES MWIN WR 0-2 0-2 0: OFF, 1: PIP, 2: PbyP
PIP SIZE MPSZ WR 0-2 0-2 0: SMALL, 1: MEDIUM, 2: LARGE
PIP POS MWPS WR 0-3 0-3 0: UPPER RIGHT, 1: UPPER LEFT, 2: LOWER RIGHT, 3: LOWER LEFT
PIP SOURCE MWIP WR 2 2 D-SUB
10 10 HDMI1
13 13 HDMI2
14 14 DisplayPort
21 21 OPTION
SOUND CHANGE MWAD WR 1-2 1-2 1: MAIN, 2: SUB
RESET RPIP W 1
OTHERS menu
Function Command Direction Parameter Reply Control/Response contents
MONITOR LOCK ALTG WR 0-3 0-3 0: REMOTE CONTROL, 1: MONITOR BUTTONS, 2: BOTH, 3: OFF