Sharp PN-40TC1 Operation Manual Download Page 17

Page: 17 / 50

Caution

• When all connections are complete, turn on the power.

• Turn on the monitor first before turning on the computer or

playback device.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• For a complete electrical disconnection, pull out the main

plug.

Turning power on/off

Press the POWER button to turn the power ON/OFF.

You can also turn the power ON/OFF by pressing the

MONITOR ON button/MONITOR OFF button on the remote

control unit.

TOUCH

Power LED

POWER button

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

Turning Power On/Off

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in the input signal waiting mode and you

press the POWER button, the monitor enters standby

mode.

• To disable the logo screen from displaying when turning the

power ON, set LOGO SCREEN to OFF on the OTHERS

menu. (See page 29.)

Mode setting

When the monitor is turned on for the first time after being

shipped from the factory, the mode setting screen will be

displayed.
(1) Press the or button to select YES or NO.
(2) Press the ENTER button.
YES:

• OPERATION MODE is set to MODE1.

• OFF IF NO OPERATION is set to ON, and POWER

SAVE MODE is set to ON. (These settings can not be

changed.)

• If there is no operation for 4 hours or more, the monitor

automatically enters standby mode.

• Compared to when set to OFF, the current consumption

is reduced while the monitor is in standby mode, but the

startup time from standby mode becomes longer.

• While the monitor is in standby mode, control via LAN

will be disabled.

NO:

• OPERATION MODE is set to MODE2.

• OFF IF NO OPERATION is set to OFF, and POWER

SAVE MODE is set to OFF. (These settings can be

changed.)

• Compared to when set to ON, the startup time from

standby mode is reduced, but more power will be

consumed in standby mode.

Even after being set, changes can be made using

OPERATION MODE, located in MONITOR menu. (See page

28.)

Summary of Contents for PN-40TC1



















































Search results

Summary of Contents for PN-40TC1

Reviews:

Related manuals for PN-40TC1

Brands by name

Popular brands

Sharp PN-40TC1, Operation Manual

Search results

Summary of Contents for PN-40TC1

Reviews:

Related manuals for PN-40TC1

Brands by name

Popular brands