1 hour
Cancel
4 hours
8 hours
ION AUTO
When pressed, the unit will switch between Clean
Mode and the Ion Control Mode automatically de-
pending on the amount of impurities in the air as
detected by the odor sensors. Clean Mode will
operate for 1 minute when the Auto function is
selected.
ION CONTROL
When pressed, the unit will constantly operate in
Ion Control Mode.
The Plasmacluster Ion Indicator Light is green.
CLEAN
When pressed, the unit will con-
stantly operate in the Clean Mode,
in which the same numbers of posi-
tive and negative ions are dis-
charged. The Plasmacluster Indica-
tor Light is blue.
ION OFF
The generation of ions will cease and
the Plasmacluster Indicator Light will
go out.
E-14
REMOTE CONTROL OPERATION
OPERATION
Operations available with
the Remote Control
• AUTO
• MANUAL
• POLLEN
• OFF TIMER
• QUICK CLEAN
• Lights ON/OFF
Plasmacluster Ion mode
selections
• ION AUTO
• CLEAN
• ION CONTROL
• ION OFF
POWER ON/OFF Button
• When you press the
POWER ON/OFF Button,
a short beep will sound
and operation will start in
AUTO Mode.
• Unless the power cord has
b e e n u n p l u g g e d , t h e
operation starts in the
previous mode the unit was
operated in.
• To stop, press the POWER
ON/OFF Button again.
A long beep will sound and
operation will stop.
Auto (Fan Speed) Button
The fan speed switches au-
tomatically depending on the
amount of impurities in the air.
Manual (Fan Speed) Button
T h e f a n s p e e d c a n b e
switched among Silent,
MEDIUM and MAX settings.
QUICK CLEAN Button
See page E-12
LIGHTS ON/OFF Button
Switches the Plasmacluster
Indicator Light and CLEAN-
SIGN Light either ON or OFF.
Pollen Mode Operation
Button
See Page E-12
Filter Reset Button
When the Washable Active Carbon
Filter is cleaned and reinserted into
the main unit, press the Filter
Reset Button with a pointed
instrument such as a pen.
The Filter Indicator light will then
go out with a beep.
Transmitter
Plasmacluster Ion Mode Selections
Off Timer Button
The set time switches every time
the button is pressed as shown
below.
• The indicator light shows the
remaining time.
• The unit will stop operation when
the time is up.
