•
Confirm the item
COM2 Port
is set to
Auto
or
Enabled
, and
Mode
to
IrDA
in the
Advanced
menu of the Setup Utility. You cannot use ASK mode in your
computer.
•
Confirm
System stand by/hibernate
is set to
Never
in the
Power Schemes
tab of
the
Power Options Properties
dialog box.
•
If you still have the problem after performing the above, set
Turn off hard disks
to
Never
in the
Power Schemes
tab of the
Power Options Properties
dialog box
•
If communicating with Sharp organizer, confirm it’s battery power is full and the
settings for communication is correct.
•
Do not use the IR port under intense fluorescent light or near cellular phones.
Question: Why can't I communicate through the built-in modem?
(The built-in modem may not be available in some countries)
•
Confirm the telephone line is properly connected to the modem jack.
•
Confirm the dial settings of Windows Me or communication software are matched
with the telephone line.
•
Confirm
Country/Region
in
Dialing Properties
dialog box is set correctly
•
Confirm the network configuration is appropriate.
•
Confirm the user name or password is correct.
•
Confirm the COM port in the communication software is set appropriately.
•
Confirm
System standby
is set to
Never
in the
Power Schemes
tab of the
Power
Management Properties
dialog box.
•
If the modem is connected to a PBX, it may not work properly. Connect it directly
to the telephone line.
Question: Why the communication speed is slow?
(The built-in modem may not be available in some countries)
•
Close any other applications except for necessary for communications.
•
Try another phone numbers or period of time.
Question: Why can’t I use LAN adapter?
•
Network settings may not be appropriate. Follow the instructions below:
Summary of Contents for PC-MR70
