8
Contents/Precautions
SH-06E_E_01.fm
[8/11]
Do not charge the internal battery in the following locations.
Areas with high humidity or dust, or in areas exposed to frequent
vibrations
Close to land-line phones, TVs, radios, etc.
Adapters or the wireless charger may become warm during
charging but this is not a malfunction.
Do not use the DC adapter to charge the battery when the
car engine is not running.
May cause the car battery to run down.
When using an outlet with a feature to prevent the plug from
being removed accidentally, follow the instructions in the
outlet user’s guide.
Do not subject to strong force or impacts. Also, do not
deform the charger terminals.
May cause a malfunction.
Do not use the wireless charger with a blanket etc. covering
it.
Connect only the specified devices and exclusive AC
adapter to the wireless charger.
Do not place the handset on the wireless charger with the
adapters or Micro USB Cable 01 (sold separately)
connected to the handset.
Never place a magnetic card etc. near the wireless charger.
The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
Never place magnetized items near the wireless charger.
Putting highly magnetized items closer may cause an error.
Do not apply unnecessary force when inserting/removing
the docomo mini UIM card.
Customer is responsible for malfunctions arising from
inserting docomo mini UIM card into a different IC card
reader/writer etc.
Always keep IC area clean.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Keep a separate memo and note information stored on the
docomo mini UIM card.
DOCOMO shall not be liable for any loss of content.
To protect the environment, please take any unneeded
docomo mini UIM cards to a sales outlet such as a docomo
Shop.
Do not damage, touch haphazardly or short-circuit the IC.
May cause data loss or a malfunction.
Do not drop or otherwise subject the docomo mini UIM card
to severe impact.
May cause a malfunction.
Never bend the docomo mini UIM card or place heavy
objects on it.
May cause a malfunction.
Do not insert the docomo mini UIM card to the handset with
a label or sticker attached on the card.
May cause a malfunction.
The handset supports the security function that meets the
Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.
Even if any leak of data or information occurs while making
communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.
Radio frequencies
In the home screen, [
R
]
/
[Settings]
/
[Device info]
/
[Authentication] to confirm the radio frequencies the
Bluetooth function of the handset uses. The followings are
the descriptions:
①
2.4: This radio equipment uses the 2400 MHz band.
②
FH: The modulation system is the FH-SS system.
③
1: The estimated coverage distance is 10 m or less.
④
XX: Another modulation system is used.
⑤
4: The estimated coverage distance is 40 m or less.
⑥
: All radio frequencies between 2400 MHz and 2483.5
MHz are used and the frequencies for mobile object identifiers
shall not be avoided.
Cautions on using Bluetooth devices
Bluetooth operates at radio frequencies assigned to the
in-house radio stations for a mobile object identifier that
have to be licensed and is used in production lines of a
factory, specific unlicensed low power radio stations, and
amateur radio stations (hereafter, referred to as “another
radio station”) in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.
1. Before using the handset, make sure that “another radio
station” is not operating nearby.
2. If radio interference between the handset and “another
radio station” occurs, avoid interference by moving
immediately to another place or “turning off the power”.
3. Contact the number listed in “General Inquiries” on the
last page for further details.
Wireless LAN (WLAN) uses radio waves to communicate
information. Therefore, it has an advantage of freely
connecting to the LAN within the service area. On the other
hand, if security setting is not set, it is possible for a
malicious third party to intercept the communication
contents or hack. It is recommended to set security setting
at your own risk and judgement.
Wireless LAN
Do not use wireless LAN near magnetic devices such as electric
appliances or AV/OA devices or in radio waves.
･
Magnetism or radio waves may increase noises or disable
communications (especially when using a microwave oven).
･
When used near TV, radio, etc., reception interference may occur
or channels on the TV screen may be disturbed.
･
If there are multiple wireless LAN access points nearby and the
same channel is used, search may not work correctly.
Radio frequencies
In the home screen, [
R
]
/
[Settings]
/
[Device info]
/
[Authentication] to confirm the radio frequencies the
WLAN-installed devices use. The followings are the
descriptions:
①
2.4: This radio equipment uses the 2400 MHz band.
②
DS: The modulation system is the DS-SS system.
③
OF: The modulation system is the OFDM system.
④
4: The estimated coverage distance is 40 m or less.
Notes about docomo mini UIM card
Notes on using Bluetooth function
Notes about wireless LAN (WLAN)
ӱġ
Ӳġ ӳġ
Ӵġ ӵġ
Ӷġ
ӱġ
Ӳġ
ӳġ Ӵġ
ӵġ
SH-06E_E.book 8 ページ ２０１３年４月２４日 水曜日 午後４時５９分
