15
Before Using the Handset
SH-06E_E_02.fm
[15/26]
[Read the user’s guides of Wireless Charger 01/02 (sold
separately)]
Following operations describe how to charge with Wireless
Charger 02.
Part names are as followings.
･
Charging assist button is a button to use when charging does
not start even after a mini compatible device with small output
capacity is placed on the center of the charging area.
1
Insert the connector of the exclusive AC
adapter into the wireless charger (
1
)
:
Insert the connector securely.
:
Insert only the exclusive AC adapter.
2
Insert the power plug of the exclusive AC
adapter into an outlet (
2
)
3
When you place the handset on the charging
area, the charging lamp and charging
information illuminate and charging starts
:
Place the handset slowly with the
b
mark side turned down
so that
b
mark of the wireless charger faces the
b
mark of
the handset.
:
The handset will be detected when it is put on the charging
area. LEDs switch by turns and flash during the detection.
One or two LED(s) closest to the point where the handset
has been detected illuminate(s) and charging starts.
:
If the handset power is turned off, the charging lamp flashes
in red when charging starts. Also, the charging lamp may
flash before charging finishes.
4
When charging is complete, the charging lamp
and charging information turn off
:
Remove the handset from the wireless charger.
When the handset is turned on, you can charge the handset by
connecting the handset to a PC with Micro USB Cable 01 (sold
separately).
For details on connecting to a PC
n
P. 75
Do not forcibly insert or remove. May cause damage to the
external connector terminal and the microUSB plug or result in
a malfunction.
Do not place objects near the handset when charging. May
damage the handset.
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car
battery.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
Refer to the user’s guide of DC Adapter 03 for details.
Charging with wireless charger
Products with
b
mark conform with wireless power
standard of Wireless Power Consortium (WPC).
Charging
information
(five LEDs)
Charging area
Charging assist button
Place the wireless charger on a stable and horizontal surface to
charge.
Pull the exclusive AC adapter from the outlet if it will not be
used for a long time.
Multiple handsets cannot be charged at the same time.
When charging, remove the cover etc. with which the handset is
equipped.
When noises interfere on a TV, radio set, etc. during its use,
use the wireless charger after distancing it as far away from a
TV, radio set, etc. as possible.
You cannot use the camera during charging.
When charging, keep the wireless charger at least 30 cm away
from wireless charging compatible devices other than the
handset to charge. Otherwise the handset to charge may not be
detected and thus may not be charged.
Do not move the wireless charger and the handset while
charging.
Do not let the vibrator activated while charging the handset.
Note that charging may not be complete or the handset may fall
since it moves due to vibrations.
If you charge the handset with a commercially available product
with
b
mark, the handset may not receive calls during charging.
Charge with Wireless Charger 01/02.
Charging with Micro USB Cable 01
Charging
lamp
Charging
information
(five LEDs)
100V AC
outlet
Exclusive AC adapter
Power plug
Connector
SH-06E_E.book 15 ページ ２０１３年４月２４日 水曜日 午後４時５９分
