Sharp Notevision XG-P10XE Operation Manual Download Page 18

Page: 18 / 67

Setup & Connections

Connecting the Projector

Connecting the Remote Mouse Receiver

You can use the remote control as a remote mouse.

Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.

Connect the other end to the USB port on the remote mouse receiver.

Connecting to the USB port on a PC or Macintosh

USB port

Remote mouse
receiver

Use the USB port (PC
or Macintosh) to
connect the supplied
USB mouse control
cable to the remote
mouse receiver.

Connecting to the PS/2 port on a PC

Turn off the power of the PC.

Connect one end of the supplied PS/2 mouse control cable to the corresponding terminal on the PC.

Connect the other end to the PS/2 port on the remote mouse receiver.

Turn on the power of the PC.

CAUTION

• Do not connect or disconnect the mouse control cables to or from the computer

while it is on. This may damage your computer.

• Do not connect both the PS/2 and USB mouse control cables to the remote mouse

receiver.

• The wireless mouse functions can be used to operate computers compatible with PS/2 or

USB type mouse systems.

• Windows 95 does not support USB mouse driver software.

Remote mouse
receiver

PS/2 port

Use the PS/2 port
(PC) to connect the
supplied PS/2 mouse
control cable to the
remote mouse
receiver.

USB mouse control
cable

PS/2 mouse control
cable

Summary of Contents for Notevision XG-P10XE




































































Search results

Summary of Contents for Notevision XG-P10XE

Reviews:

Related manuals for Notevision XG-P10XE

Brands by name

Popular brands

Sharp Notevision XG-P10XE, Operation Manual

Search results

Summary of Contents for Notevision XG-P10XE

Reviews:

Related manuals for Notevision XG-P10XE

Brands by name

Popular brands