Sharp Notevision XG-C58X Operation Manual Download Page 41

Page: 41 / 106

Basic Operation

-37

Turning the Power off

Press

STANDBY

on the projector

on the remote control,

then press that button again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.

Note

•

If you accidentally pressed

STANDBY

and do not want

to put the projector into the standby
mode, wait until the confirmation
message disappears.

•

The projector cannot be operated
while a message “Shutting Down.
Please Wait.” is displayed.

Unplug the power cord from the
AC outlet after the cooling fan
stops.

Info

•

Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.

MUTE button

STANDBY button

ENTER button

MENU
button

buttons

Summary of Contents for Notevision XG-C58X











































































































Search results

Summary of Contents for Notevision XG-C58X

Reviews:

Related manuals for Notevision XG-C58X

Brands by name

Popular brands

Sharp Notevision XG-C58X, Operation Manual

Search results

Summary of Contents for Notevision XG-C58X

Reviews:

Related manuals for Notevision XG-C58X

Brands by name

Popular brands