Sharp Notevision XG-C58X Operation Manual Download Page 76

Page: 76 / 106

-72

Locking the Operation Buttons on the Projector

This function can be used to lock the use of certain operation buttons on the projector.
The following are the three keylock levels.

Setting up the Keylock

Select “Keylock Level” in the “Options
(2)” menu on the menu screen.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

If a password has been set, the password
input box will be displayed when select-
ing the “Keylock Level”.

Canceling the Keylock
Setting

When the Keylock Level is set to “Normal”,
all buttons are functional.

Select “

Keylock Level

” in the “Options

(2)” menu on the menu screen and set
“ Normal”.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.

•

If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.

Keylock Level

Normal

Level A

Level B

Description

All operation buttons are functional.

Only INPUT/VOLUME buttons on the projector are available.

All operation buttons on the projector are unavailable.

Summary of Contents for Notevision XG-C58X











































































































Search results

Summary of Contents for Notevision XG-C58X

Reviews:

Related manuals for Notevision XG-C58X

Brands by name

Popular brands

Sharp Notevision XG-C58X, Operation Manual

Search results

Summary of Contents for Notevision XG-C58X

Reviews:

Related manuals for Notevision XG-C58X

Brands by name

Popular brands