Easy to Use Functions
-73
Setting up a Password
Entering the Password
Select “
Password
” in the “Options (2)”
menu on the menu screen.
➝
For operating the menu screen, see
pages
42 to 45
.
1
Press
'
'
'
'
'
or
"
"
"
"
"
to select the de-
sired number and then press
|
|
|
|
|
.
2
Enter the 3 remaining digits
and press
.
3
Enter the password again in
“Reconfirm” and press
.
Note
•
When a password is set, you need
to enter the password to change “PRJ
Mode”, “Keylock Level”, “RS-232C”,
“Anti-Theft” and “All Reset” settings.
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page
71
) is more effective.
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
Select “RS-232C” in the “Options (2)”
menu on the menu screen.
➝
For operating the menu screen, see
pages
42 to 45
.
Note
•
When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.
•
Make sure that both the projector and computer
are set for the same baud rate. Refer to the
computer’s operation manual for instructions
for setting the computer’s baud rate.
Summary of Contents for Notevision XG-C58X
