31
HOW TO USE THE NETWORK SCANNER FUNCTION
2
ENABLING SCANNING MARGINS (VOID AREA)
When this function is enabled, margins (void areas that are not scanned) are created around the edges of the machine's
maximum scanning area.
Select scan mode, place the original (steps 1 to 3 on
), and then follow the procedure below.
The factory default setting for the void area is "OFF" (disabled).
If you need to change the void area setting, follow these steps.
Void area: 7/64" (2.5 mm) from the top and bottom edges
1/8" (3.0 mm) from the left and right edges
1
Press the [SPECIAL FUNCTION] key in
scan mode.
Perform this operation from the
base screen of scan mode.
When the [SPECIAL
FUNCTION] key is pressed, the
special function menu appears.
(To select scan mode, see step
1 on
.)
2
Select "VOID AREA" with the [
] or
[
] key.
3
Press the [OK] key.
4
Select "ON" or "OFF" with the [
] or
[
] key.
5
Press the [OK] key.
The setting is stored and you
return to the base screen.
EXPOSURE
COLOR MODE
PAPE
RESOLUT
COPY
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
PQ
ACC
LEX SCAN
LEX SCAN
UPLEX
SPECIAL FUNCTION
B/W THRESHOLD
EXPOSURE ADJUST
LIGHT SOURCE
VOID AREA
GHI
PQRS
BACK
OK
AN
X
VOID AREA
ON
OFF
OK