25
HOW TO USE THE NETWORK SCANNER FUNCTION
2
TRANSMITTING A TWO-SIDED ORIGINAL
Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.)
1
Make sure the machine is in scan
mode.
When the SCAN indicator is lit,
the machine is in scan mode. If
the indicator is not on, press
the [SCAN] key. If auditing
mode has been enabled for the
scan function in the system
settings, a message will appear
prompting you to enter your account number when you
switch to scan mode. Enter your account number (five
digits) with the numeric keys. (
2
Place the original(s) in the document
feeder tray.
For information on placing an original, see "4. COPY
FUNCTIONS" of the "Operation manual (for general
information and copier)".
3
Check the original size.
Press the [ORIGINAL SIZE] key to open the original
size selection screen. See
to set the original size.
4
Press the [DUPLEX SCAN] key.
The duplex mode
selection screen appears.
5
Select "2-SIDED" with the [
] or [
]
key.
6
Press the [OK] key.
The duplex original type
selection screen appears.
7
Select booklet or tablet for the duplex
original type with the [
] or [
] key.
8
Press the [OK] key.
You will return to the base screen and the duplex
scanning mode icon will appear.
9
Continue from step 4 of "BASIC
TRANSMISSION PROCEDURE" (
).
Do not use an original that is not a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R, B5, B5R, or A5).
Otherwise a scanning error or cut-off image may result.
Note
LINE
DATA
DATA
ON LINE
FAX
SCAN
DUPLEX SCAN
DUPLEX SCAN
DUPLEX
AUTO%
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
11x17
8 x14
8 x11
INCH
1
2
1
2
DUPLEX SCAN
DUPLEX SCAN
DUPLEX
T
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
DUPLEX SCAN
1-SIDED
2-SIDED
PQ
ACC
LEX SCAN
LEX SCAN
UPLEX
DUPLEX SCAN
1-SIDED
2-SIDED
GHI
PQRS
BACK
OK
AN
X
DUPLEX STYLE
BOOKLET
OK
• Two-sided scanning is not possible when "COLOR MODE" is set to "COLOR" or "GRAY".
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after the transmission is finished. Two-sided
scanning mode can also be canceled by pressing the [CA] key.
• Two-sided scanning is only possible when an RSPF is used. Automatic scanning
of both sides of an original is not possible when the document glass is used.
• Two-sided scanning of originals longer than 11" x 17" (A3) is not possible.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
Note
BOOKLET
TABLET